Panasonic KX-FMC230 Operating Instructions Manual page 100

When a function does not work, check here before
requesting help
(cont.)
Fax reception
I cannot receive documents.
I cannot receive documents
automatically.
The recording image is faint.
The printing quality is poor.
A blank sheet is ejected after the
received documents are printed out.
CAUSE & REMEDY_:_
• The telephone line cord from the single telephone line is connected
to the EXT jack on the unit. Connect to the LINE jack.
oThe receive mode is set to the TEL mode. Set to the TEL/FAX,
FAX ONLY or EXT.TAM mode.
eThe time to answer the call may be too long. Decrease the number
of rings (see pages 59 and 65).
oThe sender transmitted a faint document, Ask them to transmit a
clearer copy of the document.
oThe thermal head is dirty. Please clean it (see page 114).
oSome paper has instructions recommending which side to print on.
Try turning over paper. We recommend smooth paper such as
Hammermill ® jet PRINT for clearer printing.
eThe receiving reduction rate is not programmed correctly. Program
the proper reduction rate (see page 72).
Copying
PROBLEM
A dirty pattern or a black line
appears on the copied documents.
The copied image is distorted.
The document isnot copied
properly.
The copied document is blank.
The printing quality is poor.
CAUSE & REMEDY
sThe glass or rollers are dirty, Please clean them (see page 114).
oThe thermal head is dirty. Please clean it (see page 114).
oThe film is not inserted correctly. Insert it correctly (see pages 110
and 111).
oThe film is not inserted correctly. Insert it correctly (see pages 110
and 111).
• Some paper has instructions recommending which side to print on.
Try turning over paper• We recommend smooth paper such as
Hammermitl ® jet PRINT for clearer printing•
A paper jam occurs during copying, eThe film is not inserted correctly. Insert it correctly (see pages 110
and 111).
100 I
For Assistance, Call 1-800-435-7329 }