Setting The Dialing Mode (Touch Tone Or Pulse) - Panasonic KX-FMC230 Operating Instructions Manual

Setting the dialing mode
(touch tone or pulse)
The unit will automatically set the dialing mode to TONE or PULSE when the unit is turned on if this feature is
set to AUTO.
If you cannot dial, change the dialing mode setting to TONE or PULSE by following the instructions below.
1
2
3
4
5
6
Press (_,
Display: I SYSTEM
SET UP I
Press [_, then [] [_.
Press _START/COPY/SET_.
I MODE=_UTO _••1 I
Press (_ or (_ to select the desired setting.
Press[START/COPY/SET_.
] SETUP ITEM [ ] )
Press_.
Dial
Note:
olf you change to a different telephone company and
this company has a different dialing mode service,
reset your dialing mode,
42