Panasonic KX-FMC230 Operating Instructions Manual page 62

EXT.TAM mode
(cont.)
Securing the remote operation for the answering machine
(remote TAM activation ID)
Set the same remote access code on the answering machine to the facsimile unit as the remote TAM
activation ID.
Important:
oThis ID should be different from the fax activation code to prevent the facsimile unit from activating the fax
function when you operate the answering machine from a remote location using the remote access code
(see page 68).
Press _.
Display: I
SYSTEM SET UP
2 Press _], then [] (_.
[REMo , AcT]
Press ISTART/COPY/SET/.
}MODE=OFF IRA]}
4
P'°°" (_ or (_ to select "ON".
IM°°E=°"""1
Press ISTART/COPY/SET).
I ID=II 1
eThe display will show.the pre-selected ID.
eThis ID can be from 1 to 5 digits in length
using numbers 0 through 9, and the characters
* and #.
Press [START/COPY/SET 1.
1 [ SETUP ITEM [ ] ]
Press [_.
Dial
Enter your remote TAM activation ID number
using the dial keypad.
Receiving a voice message and fax in the same call
The caller can leave a voice message and send a fax document during the same call.
Inform the caller of the following procedures beforehand.
1. The caller calls your unit.
eThe external telephone answering machine will answer the call.
2. The caller can leave their message after the greeting message.
3. The caller then presses [] [] (fax activation code).
eThe facsimile unit will activate the fax function.
4. The caller must then press their start button to send a document.
Note:
eThe fax activation code can be changed. See page 68.
62