Registration And Operation - VTech sbc20-2432 Owner's Manual

Registration and Operation

Registration And Operation Of The 20-2422 Accessory Handset
Your 20-2432 system can operate up to 8 Handsets.
The accessory Handset consists of the following:
Setup Of The 20-2422 Accessory
Handset
.
1 Plug the AC power adapter into
an electrical outlet.
2. Remove the Handset battery
cover by pressing on the indent
and sliding downward.
.
3 Place the new battery in the
Handset, with the metal contacts
aligned with the charge contacts
in the battery compartment.
4. Replace the battery cover by
sliding it upward.
5. Place the Handset in the Charge
Cradle, and allow it to charge for
12 hours. After the initial charge,
a maintenance charge of 8 hours
should be sufficient.
12