Table of Contents
Advertisement
Handset and Base Operation
ERASE
Press RDL. Scroll to the desired phone number, press SELECT, then press
ERASE.
SAVE
Press RDL. Scroll to the desired phone number, press SELECT, then press
SAVE.
You'll then be prompted to ENTER NAME. Use the keypad to enter the letters
of the name. If you make a mistake, press CLR to backspace. To insert a space,
press
. When finished, press SAVE.
For more information on entering phone numbers into the Directory, see the
Memory section.
From the Base Unit:
•
Follow the same procedure used for the Handset Redial.
- OR -
•
Press the appropriate LINE key and then SPEAKERPHONE (or HEADSET),
then press REDIAL key to dial the last number in the Base Unit redial
memory.
Answering Calls
From the Handset:
Press the appropriate LINE key, or HANDSFREE to use the Handset
Speakerphone option.
If the Handset is active on one line when the idle line rings, you will hear
a special alert tone, signifying an inbound call. This alert is designed to
minimize disruption of the call in progress. You can then:
•
Press OFF twice to end the first call, then press the appropriate LINE
key (or HANDSFREE to use the Handset Speakerphone option) to answer
the new call;
- OR -
•
Press the appropriate LINE key to answer the new call. The original call
will automatically be placed on HOLD. You can end the new call by
pressing OFF, then return to the original call by pressing the appropriate
LINE key.
You can also Conference both lines together. See Conference Calling, in
this User's Manual.
From the Base Unit:
If a line is ringing, pressing SPEAKERPHONE (or HEADSET if you are using
a Headset connected to the Base) will answer the inbound call.
Press SPEAKERPHONE (or HEADSET) to end your call.
29
Advertisement
Table of Contents
