Registration And Operation - VTech vt2431 User Instructions

Registration And Operation Of The VTech VT2420 Accessory
Handset
Your VTech GIGAPHONE system can operate up to 4 Handsets.
The VTECH accessory Handset consists of the following:
Belt Clip
Handset
1
3
5

Registration and Operation

Battery Pack Charger Unit
Setup Of The VT2420 Accessory
Handset
1.
Plug the AC power adapter into
an electrical outlet.
2.
Remove the Handset battery
cover by pressing on the indent
and sliding downward.
3.
Place the new battery pack in the
Handset, with the metal contacts
aligned with the charge contacts
in the battery compartment.
4.
Replace the battery cover by
sliding it upward.
5.
Place the Handset in the Charge
Cradle, and allow it to charge for
12 hours. After the initial charge,
a maintenance charge of 8 hours
should be sufficient.
12