Table of Contents
Advertisement
Handset and Base Operation
If the Base is active on one line when the idle line rings, you will hear a special
alert tone, signifying an inbound call.
disruption of the call in progress. You can then:
•
Press SPEAKERPHONE (or HEADSET if you are using a Headset
connected to the Base) to end the first call, then Press SPEAKERPHONE
or HEADSET to answer the new call;
-OR-
•
Press the HOLD softkey to place the original call on hold. After that, press
the appropriate LINE key and then SPEAKERPHONE (or HEADSET) to
answer the new call.
SPEAKERPHONE (or HEADSET). Return to the original call by pressing
the appropriate LINE key and then SPEAKERPHONE (or HEADSET).
You can also Conference both lines together . See Conference Calling, in
this User's Manual.
Mute Function
Flash Function
This alert is designed to minimize
You can end the new call by pressing
During an active call pressing either the
MUTE softkey on the Handset or the
MUTE key on the Base (when in
Speakerphone or Headset mode), will
disable the microphone.
again to return to the
conversation.
Hold Function
From the Handset:
•
Press the HOLD softkey to place a
call on hold. To return to the call
press the appropriate LINE.
From the Base:
•
During an active call, press the
HOLD key to place a call on hold.
The LINE key will flash to indicate
a call is on hold.
•
To return to the call press the
appropriate LINE and then press
SPEAKERPHONE.(or HEADSET)
You can use your 20-2432 with
services such as call waiting. Simply
press the LINE key on the Handset
or the FLASH key on the Base (when
in Speakerphone or Headset mode) to
flash the line.
30
Press MUTE
2-way
Advertisement
Table of Contents
