Registration And Operation - VTech QW2432 Owner's Manual

Registration and Operation of the QW2422 Accessory Handset
QW2432
Your system can operate up to 4 Handsets.
The accessory Handset consists of the following:

Registration and Operation

Setup of the QW2422 Accessory
Handset
1.
Plug the AC power adapter into
an electrical outlet.
2.
Remove the Handset battery
cover by pressing on the indent
and sliding downward.
3.
Place the new battery pack in the
Handset, with the metal contacts
aligned with the charge contacts
in the battery compartment.
4.
Replace the battery cover by
sliding it upward.
5.
Place the Handset in the Charge
Cradle, and allow it to charge for
12 hours. After the initial charge,
a maintenance charge of 8 hours
should be sufficient.
12