Table of Contents
Advertisement
Handset and Base Operation
Adjusting Handset Volume
NOTE: The Handset must be IN USE to adjust the volume.
(also applies to the Handset Speakerphone)
•
Press the VOL key, located directly
below the lower left corner of the
display.
•
Use the keys directly below the
symbols on the display to raise or
lower the Handset volume. Notice the
change in the display graph as you
adjust the volume.
volume will be represented by an
increase in shaded area on the graph.
A decrease in volume will result in a
reduction of the shaded area.
Press the OK key (top, center) to
•
confirm your adjustment.
Base Speakerphone or Headset
Volume
During an active call simply press the
•
Volume UP or DOWN keys to adjust the
Speakerphone or Headset volume.
When you reach the maximum or
minimum setting, a triple beep will
sound.
Intercom/Transfer Function
Press INTERCOM/TRANSFER on
any Handset or Base registered to
your 20-2432 system, or the Base
Unit.
The screen will display your options,
for example:
BASE
HANDSET 1
HANDSET 2
HANDSET 3
GLOBAL PAGE
31
/
/
An increase in
0
1
2
3
*
Advertisement
Table of Contents
