Table of Contents
Advertisement
10.10
Programming the Lock Feature
You can prevent users from changing certain features of the
hot tub. It is important to realize that after either mode is
enabled, there is no physical pad lock indicator on the topside
control panel display to inform the user that either mode is active. If
some or all topside control panel buttons are non-responsive, either lock
mode IS ENABLED. The lock modes to choice from are:
Note: If no button is pressed within 5 seconds of each selection the
screen will revert back to the Main Menu and the current settings will
remain active.
•
Access Lock will disable the ability to manually activate or adjust any
feature of the hot tub. All scheduled operations will still be preformed.
•
Settings Lock will disable the ability to change any of the user
settings. You can still activate the jet pumps and lighting. All
scheduled operations will still be preformed.
•
Set Temperature Lock will disable the temperature up and down
buttons to prevent unauthorized temperature adjustments.
A. Activating a lock feature.
1. Press
until you get to the "LOCK" Menu. The display will scroll
"LOCK MENU." After the second scroll, if no action is taken, the
system will revert back to the Main Menu.
2. Press
or
("SETTINGS LOCK") to "TL" ("SET TEMPERATURE LOCK"). Once
a selection is made, press
return to the "LOCK MENU."
B. Deactivating a lock feature.
To deactivate a lock mode, press and hold
to switch from "AL" ("ACCESS LOCK"), "SL"
to save the change. The system will
1
680 Export Series
for 10 seconds.
Page 33
Advertisement
Table of Contents
