Table of Contents
Advertisement
10.11 Programming the Lock Feature
You can prevent users from changing certain features of the hot tub. It
is important to realize that after either mode is enabled, there is no
physical pad lock indicator on the topside control panel display to
inform the user that either mode is active. If some or all topside
control panel buttons are non-responsive, either lock mode IS
ENABLED. The lock modes to choice from are:
Note: If no button is pressed within 5 seconds of each selection the
screen will revert back to the Main Menu and the current settings will
remain active.
•
Access Lock will disable the ability to manually activate or adjust any
feature of the hot tub. All scheduled operations will still be preformed.
•
Settings Lock will disable the ability to change any of the user
settings. You can still activate the jet pumps and lighting. All
scheduled operations will still be preformed.
A. Activating a lock feature.
1. Press
until you get to the "LOCK" Menu. The display
will scroll "LOCK MENU." After the second scroll, if no
action is taken, the system will revert back to the Main Menu.
2. Press
or
("SETTINGS LOCK"). Once a selection is made, press
the change. The system will return to the "LOCK MENU."
B. Deactivating a lock feature.
To deactivate a lock mode, press and hold
10.12 Resetting the Wi-Fi Connection (optional feature for 50Hz
models only)
If there is a need to reset the Wi-Fi connection, follow the
steps below:
Note:
•
If no button is pressed within 5 seconds of each selection the
screen will revert back to the Main Menu and the current settings
will remain active.
•
Any time the hot tub is connected to the Wi-Fi the Wi-Fi icon
will be displayed.
1. Press
until you get to the "WIFI" Menu.
2. Press
to enter the reset menu. The display will read
1
"RSET" and scroll "RESET WI-FI."
3. Press
to reset the system.
1
to switch from "AL" ("ACCESS LOCK") to "SL"
1
for 10 seconds.
780 Series
to save
Page 37
Hide quick links:
Advertisement
Table of Contents
