Table of Contents
Advertisement
680 Export Series
5.0
Power Requirements
®
Sundance
spas are designed to provide optimum
performance and flexibility of use when connected to the
maximum electrical service listed below. If you prefer, your
dealer can perform a minor circuit board modification to
allow your spa to accept an electrical service other than the
factory setting.
Note: Refer to page 48 for circuit board configuration details or contact
your authorized Sundance dealer.
Voltage:
Max. Current Draw:
1-Pump System
2-Pump System
Wattage:
1-Pump System:
2-Pump System:
Frequency:
Number of Wires:
Single Breaker is the factory default.
*
For this service, the heater will not operate while either jets pump is
running in high speed. The service 1 breaker will include connection for all
components. Note: pump 2 runs only in high speed.
**
For this service, the heater will operate while one jets pump is running
in high speed. The service 1 breaker will include connection for all
components. Note: pump 2 runs only in high speed.
Page 12
Export Models (50 Hz) Service
Single Breaker
Service 1
(including Heater)*
230 VAC
17A
17A
3.9 kW
3.9 kW
50 Hz
3
Single Breaker
Service 1 (including
Heater)**
230 VAC
21A
24A
4.8 kW
5.5 kW
50 Hz
3
Advertisement
Table of Contents
