Table of Contents
Advertisement
1. Press the POWER switch to the ON position. Also
turn on the power to the stereo components you
wish to use.
2. Use the function buttons and tape monitor but-
ton as appropriate to select the desired program
source.
Select function according to the table on the right.
Operate
the appropriate
stereo
camponent
to
play back the program source.
Adjust the volume with the VOLUME control and
the tone with the GRAPHIC EQUALIZER controls.
TAPE RECORDING
wo
>
Function
TAPE 2
buttons
MONITOR
button
To listen to a tape on the cas-
sette deck connected to TAPE 2
ON
MONITOR jacks.
SS
4
To listen to TAPET/DAT
TAPE
OFF
VDAT
o S hye
chek a
ec anes cee See
To listen to the component con-
VCR/LD
OFF
nected to VCR/LD jacks
|—__—
——|—
To listen to a CD
cD
OFF
To listen to records
PHONO
OFF
Sra
eran es wee Leen ences
as
You can record an FM or AM broadcast, or a sound source con-
nected to the VCR/LD, CD, PHONO
terminals.
1. Press the POWER switch to the ON position.
2. Select the sound source to be recorded.
3. Operate
the
cassette
deck
connected
to the
TAPE 1/DAT or TAPE 2 MONITOR terminals.
4. Turn on (or start) the sound source to be record-
ed.
e For details of operating the cassette deck, read the operating
instructions of the cassette deck.
COPYING TAPES
When two cassette decks are used, the sound played back on the
deck connected to the TAPE 1/DAT jacks can be recorded on the
deck connected
to the TAPE 2 jacks.
¢ To make a tape copy with contents
identical to the original
tape.
e To edit a recording of an FM broadcast in order to cut out un-
wanted commercials, recording only the desired material onto
another tape.
TAPE 1/DAT
[When using two cassette decks]
1. Load the playback tape {i.e. the pre-recorded
tape) in the deck connected to the TAPE 1/DAT
jacks, and the tape to be recorded in the other
deck connected to the TAPE 2 jacks.
2. Press the TAPE 1/DAT button.
13
<ARBI4A39 >
3. Operate the cassette decks to begin copying.
Set the cassette deck with the non-recorded tape to the record-
ing mode, and set the cassette deck with the original tape to the
playback mode.
Advertisement
Table of Contents
