Table of Contents
Advertisement
REMOTE CONTROL OPERATION
L. S
Intelligent
System Control
RECEIVER CONTROL BUTTONS
ONE TOUCH OPERATION
=
wee
+
TWEUNG
@ PIONEER
FOR AV RECEIVER
@ RECEIVER POWER button
Switches the receiver power between ON and STANDBY.
@ ENTER button
@ VOLUME +, — buttons
Adjusts the overall volume.
@ ONE TOUCH
OPERATION buttons
VCR 1/2, CD, LD, TAPE:
This switches power to the TUNER ON and starts reception of the
last memorized station.
® FUNC. (function) button
Press to select the receiver input.
oes VCR
1—» VCR 2——» VIDEO —» TV/SAT-——» LD 7]
CD «———
TUNER <«——— PHONO
«—— TAPE
1
© TAPE 2 (TAPE 2 MONITOR)
button
Switches TAPE
2 MONITOR on and off.
@ GUI button
Switches GUI MODE on and off.
M.CHECK (Mode check) button
Indicates whether the GUI MODE is on or off.
When it is on, A, >, V, <J light. When it is off,
a@ ONE TOUCH
OPERATION button lights to indicate the current function.
If you press the button again while it is lit, remote control
functions change. When the remote control is in the GUI mode,
the © Select/Adjust buttons (A, >, V, <).light.
© Select/Adjust buttons (A, >, V, <J)
When the GUI mode is on, A, >, V and < fight.
When using the GUI function with the on-screen display, use for
such operations as selection and adjustments (by moving the
cursor).
When the GUI mode is off, use to operate other components.
@ MUTE button
Used to temporarily mute the sound. When it's in the on position,
the indicator on the MASTER VOLUME knob flashes. The volume
is restored when pressed again.
OPERATING OTHER COMPONENTS
When operating components other than the receiver:
1. Press the ONE TOUCH OPERATION button for the component
you want to operate.
2. Press the operation button.
NOTE:
Components that could not originally be operated by remote
contro! cannot be controlled by this unit's remote control.
23
<ARB? 051>
Advertisement
Table of Contents
