Eizo SCD 19102 Instruction Manual page 79

Optimize geometry/resolution
Note
Active and inactive resolution range
The active resolution range is defined by the values of the "Horizontal resolution" and
"Vertical resolution" input fields. This range is displayed in black and centric on the display.
The inactive resolution range is the unused range between the active resolution and the
maximum display resolution of 1280 x 1024. This range is displayed in Force Mode in gray
(with monochrome displays) or blue (with color displays).
To match the active resolution range to the actual video signal resolution, you must carry out
the following steps:
1. Open a test pattern with a clearly defined frame (e.g. SMPTE image).
2. Open the Live mode" menu: Main menu → Servicelevel 2 → Force Mode → Live mode.
3. Select either "For static pictures" or "For motion pictures" in line 6 in the "Live mode"
menu using key 2.
4. Use the "Horizontal blank pixels" input field to shift the left edge of the SMPTE image
pixel-exact to the left internal border of the gray/blue area.
Note
Gray/blue area not visible
If no gray/blue area is visible on the left and right sides of the image, reduce the
"Horizontal resolution" until the gray/blue area becomes visible.
SCD 19102 / SMD 19102
Instruction Manual, 10/2011, A5E01588521A-004
Commissioning
7.4 System settings
77