Eizo SCD 19102 Instruction Manual page 14

Safety notes
2.1 General safety notes
CAUTION
Failure to observe warnings may result in substantial damage to property
Ensure sufficient heat dissipation
Observe an appropriate spacing to neighboring objects when placing or dispensing the
devices to ensure appropriate air circulation.
Ventilation slots are provided on the housing base, the top of the cover, the rear panel and
the side panels. The permissible ambient temperature range (see instruction manual) must
not be violated.
• Installation on a desk:
• For ceiling suspension:
Avoid sources of heat
Do not install the display in the vicinity of sources of heat, e.g. radiators, heating appliances
or other devices which can generate or emit heat.
Do not subject display to excessive shocks
Take care when transporting! Use the original packaging, and transport correctly oriented!
Be sure to protect the LCD module in particular from shocks.
Care of display / Cleaning agents
• The screen surface (front panel) is extremely sensitive to mechanical damage.
• Remove water drops immediately; extended contact with water discolors the surface.
• Clean the screen and the housing using only the cleaning agents referred to in the
12
Place the unit on a solid and level surface. The installed stand as well as the mounting
surface have to be suitable for the weight of the unit.
The wall mount must be suited for the weight of the unit.
Absolutely avoid scratches, shocks etc.
instruction manual.
SCD 19102 / SMD 19102
Instruction Manual, 10/2011, A5E01588521A-004