Eizo SCD 19102 Instruction Manual page 51

Main menu
SCD 19102 / SMD 19102
Instruction Manual, 10/2011, A5E01588521A-004
Function
DPMS setting
DPMS
DPMS Off mode (backlight)
LUT choice
LUT backlight command
Select display function
Adjustment/range
On
Off
Default: On
Dimmed
Off
Default: Dimmed
On / Off
Default: On
1 ... 5
Default:
SCD 19102: LUT 1
Commissioning
7.3 Description of OSD menu
Description
The DPMS (Display Power
Management System) can
be switched on/off
When the DPMS is activated
and there is no input signal,
the backlight is switched off
or darkened (depending on
the parameter for the "DPMS
Off mode": see below).
This saves power, and
increases the service life of
the backlight.
"DPMS Off mode" can be set
to "Dimmed" or "Off". The
backlight is then either
dimmed or switched off when
the DPMS mode is active.
Permits access to the
backlight
When "On" is selected,
•
the backlight cannot be
changed in the
"Brightness/contrast"
menu.
When "Off" is selected,
•
the backlight can be
changed in the
"Brightness/contrast"
menu.
Selection of display function:
information on the selected
curve
For further details on LUT
settings, see "Display
adjustment – LUT"
(Page 64).
The LUTs that can be
selected are displayed in the
table in the OSD menu.
49