Eizo SCD 19102 Instruction Manual page 60

Commissioning
7.3 Description of OSD menu
Servicelevel 2
58
Function
Serial bus
Bus address
H-Scaler clip
Motion image improvement
Adjustment/range
Enable
Disabled
Default: Disabled
Slider from 0 ... 10
Default: 1
Slider from 0 ... 100
Active
Inactive
Default:
Interlaced signals: Active
Progressive signals: Inactive
Instruction Manual, 10/2011, A5E01588521A-004
Description
To configure a network of
several displays
This function is used to
interconnect several displays
so that they can all be
calibrated using a single
computer (connected to the
first display).
Note:
See the section "Serial
interface" (Page 34)
Definition of bus address for
display.
Supports adjustment to the
aspect ratio
The picture can be expanded
or compressed in the
horizontal direction.
Activation of motion image
improvement
Undesirable comb effects
•
can be reduced in the
case of interlaced signals
with PAL and NTSC
resolutions connected to
the "VGA" and "DVI
Analog" signal inputs.
Undesirable staircase
•
signals can be reduced in
the case of non-
interlaced signals
(progressive) of up to
60 Hz connected to the
"VGA" and "DVI Analog"
signal inputs.
Note:
See Chapter "Motion image
improvement" (Page 80)
SCD 19102 / SMD 19102