Eizo SCD 19102 Instruction Manual page 78

Commissioning
7.4 System settings
Note
Setting limit reached (applies to all settings in Force Mode!)
• Since the resolution and scanning frequency can only be set within limits, the "Force"
Note
For progressive timings with an image refresh rate greater than 60 Hz, only the item "For
static pictures" or "Reset" can be selected in line 6 in the "Live mode" menu.
76
function must be carried out when the setting limit is reached in order to continue with
the setting process. In this manner, the slider for the setting range is again set in the
center.
It may be necessary to repeat this process several times!
NOTICE
If the "Reset" setting is selected, all learned values are deactivated in the current
Force Mode window.
SCD 19102 / SMD 19102
Instruction Manual, 10/2011, A5E01588521A-004