Eizo SCD 19102 Instruction Manual page 56

Commissioning
7.3 Description of OSD menu
Servicelevel 2
54
Function
When backlight regulation is
set to "Off":
Backlight (controlled)
Backlight regulation
ADC calibration
Backlight margin
Adjustment/range
0 ... 3360
On
Off
Default: On
Execute
Information
Instruction Manual, 10/2011, A5E01588521A-004
Description
Backlight inverter value
The backlight regulation
(backlight sensor) is
switched on or off
Automatically calibrate A/D
converter for the applied
video level
The video level range of the
system is checked, and the
display set accordingly. This
results in optimum
adjustment of the individual
RGB A/D converters to the
video source.
The calibration results in a
larger and more flexible
video level range (e.g., the
full brightness is also
achieved at 700 mV if the
video level is limited at this
value).
Note
A specific test pattern and
timing are prerequisites!
The A/D converters have
already been factory-set and
need not be readjusted.
Remaining margin of
backlight that can be used
for regulation
Note
The data is only displayed
when the panel has warmed
up (after approx. 20 min).
The display value only
serves for information
purposes.
SCD 19102 / SMD 19102