Eizo SCD 19102 Instruction Manual page 19

RGB input (15-pin Sub-D/DVI/BNC)
SCD 19102
● The display is connected to the computer system using either the 15-pin Sub-D connector
or the DVI-I input socket.
SMD 19102
● The display is connected to the computer system using either the 15-pin Sub-D input
socket, the BNC sockets or the DVI input socket (digital only).
If necessary, the monitor display is adapted using an OSD menu.
Video inputs
The SCD / SMD 19102 displays feature two additional analog video inputs. The displays can
therefore be operated with analog standard video signals (PAL/NTSC). The RGB and video
inputs can be simultaneously connected to different signal sources.
Force Mode
The Force Mode function is used to adapt the SCD / SMD 19102 displays to special timing
settings.
Protective glass
The SCD / SMD 19102 CP has anti-glare protective glass fitted over the top of the LCD
panel to protect the surface of the panel against bumps and scratches. The display is
protected at the front against moisture (IPx2 protection). The space between the protective
pane and the panel is sealed to prevent dust from entering, thus helping ensure the internal
surfaces remain clean.
Landscape and portrait modes
The display can be used in landscape and portrait modes. The image rotation for portrait
mode is made on the graphics card.
In portrait mode, the keypad is positioned at the top right and the OSD is not rotated (i.e. the
OSD inscription "Dynamic help for keypad function" is still positioned above the keys).
SCD 19102 / SMD 19102
Instruction Manual, 10/2011, A5E01588521A-004
Description
3.3 Important features
17