Thermador T18 Series Installation Instructions Manual page 9

Installation dimensions
Single installation
By 6
(205)
83%, i
(2130) (2183.6)
IMPORTANT!
itis strongly recommended the top.panel boundary of the
niche be of solid material /," thickness). Make sure that
the upper. boundary is completely flush: fora depth: of at
least 4".
IMPORTANT!
Make sure thatthe side walls of the niche are completely
flush! if, for. some reasons, a:seperate niche cabinet is
created, make sure that: the furniture return-area is atleast
4" deep.
Appliance x Y
Cc H H
one
48" (17°/4'/450.8 mm)
18" (457 mm) 9 g " (229 mm)
(59)
+ 24" (23°/4"/608.2 mm) 24" (610 mm) 72" (305 mm)
1334'| | X >| 30" (29°/4"/755.6 mm) 30" (762 mm) | 15" (681 mm)
(350) | @max.1932"
(10)
Legend:
A Area for installation of the water connection. B Area for installation of the power connection.
It is recommended the water-box be placed adjacent to G Opening depth of niche, depending on kitchen design.
the installation cavity, so that it can be accessed for C = 24" (610 mm) minimum
service without uninstalling the appliance. If this is not
possible, place the recessed water box adjacent to the NOTE:
power supply socket elevated at the heights as Cavity must be square. Side wall of the cavity must be flush.
referenced in areas A+B.