Thermador T18 Series Installation Instructions Manual page 10

Side-by-Side installation
The cavity dimensions indicated above for the respective
appliance apply to a Side-by-Side installation of two
appliances.
The total width of the cavity results from the addition of the
cavity wicths indicated for the two appliances.
Example:
Freezer 18"/Refrigerator 30"
48"
18" (1219)
30"
(457) 15" (762)
90°
g4" 8378"
(2133,6) (2130)
Cc
* |e %
7] 1 8" 30"
(457) 48" (762)
(1219)
IMPORTANT!
itis strongly recommended the top panel boundary. ofthe niche
be of solic material P/," thickness).:Make sure.that the upper
bouncaryis completely flush fora depth-of atleast 4".
IMPORTANT!
Make sure that the sidewalls of the niche are completely flusn!
if, for-some reasons, a seperate niche cabinets created,
make.sure thatthe furniture return-area is atleast 4" deep.
30"
(457) 4g" (762)
(1219)
Legend:
A Area for installation of the water connection.
10
It is recommended the water-box be placed adjacent to
the installation cavity, so that it can be accessed for
service without uninstalling the appliance. If this is not
possible, place the recessed water box adjacent to the
power supply socket elevated at the heights as
referenced in areas A+B.
B Area for installation of the power connection.
G Opening depth of niche, depending on kitchen design.
C = 24" (670 mm) minimum
NOTE:
Cavity must be square. Side wall of the cavity must be flush.