Thermador T18 Series Installation Instructions Manual page 6

Installation options
There are many different installation options.
These are limited only by the design of the kitchen and the
function of the finger guard.
Individual unit
Side-by-Side
* Partition required!
When 2 appliances are installed Side-by-Side, the Basic
Combination Side-by-Side Sealing kit must be used to
ensure a stable connection.
see the section on "Optional accessories" on page 17.
Individual appliances with partition
— When dimensioning the partition for model 4, note the
thickness of the furniture fronts to prevent damage if the
doors are opened at the same time.
- Use the Extrerne Combination Side-by-Side Heating kit
if the gap between the appliances is less
than 6" (460 mm).
see the section on "Optional accessories" on page 17.
— Minimum thickness of the partition °/," (46 mm).
At the end of the kitchen units
lf one side of the appliance is visible, a side panel must be
used.
The side panel must be connected firmly to the wail, tne floor
and overhead furniture/fixtures before the appliance is
placed in the cavity.
The dimensions of the side panei are taken from the opposite
cavity wall. During installation ensure that tne cavity is square
and the exact size.