Important Laser Information For Units With Laser - Graco LineLazer V 200HS Standard Series Operation

Airless line stripers
Table of Contents

Advertisement

Important Laser Information for Units with Laser Option
LASER LIGHT HAZARD: AVOID DIRECT EYE CONTACT
Eye exposure to Class IIIa3/3R levels of laser light can potentially present an eye (retinal) injury hazard,
including spot blindness or other retinal injury. To avoid direct eye exposure:
Never look directly in to a laser beam or point the beam into the eyes of others, even at long distances.
Never shine the laser at mirror like surfaces which can cause specular reflections of the beam.
Always set the laser at a height and angle that prevents the beam from shining into people's eyes.
Immediately terminate laser emissions if personnel, animals or reflective objects approach the beam.
Always turn off laser when unattended.
Do not remove any warning labels from the laser.
Only properly trained laser operators are to use this product.
Never allow beams to be aimed toward traffic, vehicles, or heavy equipment. Even when not damaging at
long distances, the high brightness of lasers can distract or disrupt vehicle operations.
Never point a laser at an aircraft or law enforcement personnel. This is considered a felony in most loca-
tions, with the possibility of jail time, heavy fines or both.
Do not disassemble laser product. Return to factory for all service procedures.
Laser must be turned OFF when cleaning the lens, so as not to create unwanted laser refraction.
LASER RADIATION HAZARD
Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
Do not attempt to open or disassemble the laser housing under any circumstances. Doing so may cause
exposure to potentially hazardous levels of laser radiation.
No serviceable parts within. Unit is factory sealed.
FIRE AND EXPLOSION HAZARD
Connecting directly to a generator source can create a short or sparking under certain conditions.
Only connect GL1700 to a dedicated 12 volt DC battery source.
3A3426A Operation
Warnings
7

Advertisement

Table of Contents
loading

Table of Contents