Running-In; Running-In Recommendations - APRILIA LEONARDO 250 Workshop Manual

GENERAL INFORMATION
1.4.

RUNNING-IN

1.4.1.

RUNNING-IN RECOMMENDATIONS

The running-in of the engine is essential to ensure its duration and correct functioning.
If possible, drive on hilly roads and/or roads with many bends, so that the engine, the suspensions and the brakes un-
dergo a more effective running-in.
During running-in, change speed.
In this way the components are first "loaded" and then "relieved" and the engine parts can thus cool down.
Even if it is important to stress the engine components during running-in, take care not to exceed.
WARNING
Only after the first 500 km (312 mi) of running-in you can expect the best performance levels from the ve-
hicle.
Keep to the following indications:
•
Do not open the throttle completely if the speed is low, both during and after the running-in.
•
During the first 100 km (62 mi) pull the brakes with caution, avoiding sharp and prolonged brakings. This ensures a
correct bedding-in of the pads on the brake disc.
WARNING
After the first 1000 km (621 mi), Dealer carry out the checks indicated in the column "After running-in",
see 2.1.2 (REGULAR SERVICE INTERVALS CHART), in order to avoid hurting yourself or other people
and/or damaging the vehicle.
•
During the first 500 km (312 mi) do not exceed 80% of vehicle max. allowed speed.
•
Avoid keeping a constant speed for a long time.
After the first 1000 km (621 mi), increase speed progressively until reaching vehicle max. performance levels.
1 - 12
WWW.PlanDeGraissage.ORG
LEONARDO 250 - 300