CYCLE PARTS
7.11.2.
REMOVING LINKAGES
•
Raise vehicle on centre stand on a on a lifting platform.
•
Secure front wheel to platform.
•
Remove the rear part of fairing, see 7.1.3 (REMOVING
THE REAR PART OF THE FAIRING).
•
Position a proper support under the vehicle.
•
Working on both sides, unscrew and remove nut (1).
Keep screw.
•
Working on both sides, unscrew and remove screw (2).
Keep nut and washer.
•
Working on the right side, unscrew and remove nut (3).
•
Working on left side, remove screw (4).
•
Remove linkages.
7 - 72
WWW.PlanDeGraissage.ORG
LEONARDO 250 - 300