LEONARDO 250 - 300
1.7.2.
HOW TO APPLY THE DECALS
Whenever you remove any body parts:
CAUTION
Handle
the
plastic
components with care to avoid scraping
or damaging them.
Proceed with care.
Do not damage the snap-on tabs and
matching recesses.
Strictly follow the instructions below
We recommend using:
-
- a medium spatula (1);
IMPORTANT: Soft spatulas – such as those commonly
used on windscreen wipers - will leave excess water
under the decal.
-
- a sponge or spray dispenser (2) and water.
IMPORTANT: Add water with 1-3% detergent and
shake to obtain frothing.
Apply the decals as follows:
•
Place a decal (3) on a bench with the adhesive
face up.
•
Keep the decal well stretched on the bench and
remove the protective film (4).
IMPORTANT: A spray dispenser (2) will work best.
If you are using a sponge, dab the decal surface lightly
or the adhesive will deteriorate.
•
Wet the adhesive face with soap water.
•
Place the decal (3) in the proper position on the
part you wish to decorate.
IMPORTANT: Always apply the spatula to the decal
centre and move it towards the edges with regular
movements.
WWW.PlanDeGraissage.ORG
and
painted
GENERAL INFORMATION
1 - 17