Tightening; Fasteners - APRILIA LEONARDO 250 Workshop Manual

LEONARDO 250 - 300
1.9.

TIGHTENING

1.9.1.

FASTENERS

Check and tighten as required after the first 1000 km (621 mi) and every 6000 km (3728 mi) or 12 months afterwards.
WARNING
The fasteners reported in the chart must be tightened to the specified torque using a torque wrench
and applying LOCTITE
Safety-related items (
NOTE:
®
L243= secure with Loctite 243
lub = lubricate
CHART
Description
FRAME
Grab rail – frame
ENGINE LINK ROD
Engne link rod - frame
Tie rods - frame
SIDE STAND
Side stand - frame
FRONT SUSPENSION
Fork – frame
REAR SUSPENSION
Shock absorber – frame
Shock absorber - engine
ENGINE
Crankcase – engine cover
Converter air scoop – engine
Engine pivot
FILTER BOX
Filter box – engine
EXHAUST SYSTEM
Muffler – cylinder
Muffler – calliper shock anbsorber muffler mount
Muffler guard – engine
Calliper shock anbsorber muffler mount – engine
RADIATOR
Electric fan mount – radiator
Starter and electric fan thermal switches
FRONT WHEEL
Front wheel – fork
REAR WHEEL
Rear wheel – engine – calliper shock anbsorber muffler mount
FRONT BRAKE
Front brake callipers – fork
Brake master cylinder – handlebars
Brake line – master cylinder – callipers
REAR BRAKE
Rear brake callipers – calliper shock anbsorber muffler mount
Brake master cylinder – handlebars
Brake line – master cylinder – callipers
WWW.PlanDeGraissage.ORG
®
where specified.
) are in brackets.
GENERAL INFORMATION
Size Torque Notes
(Nm)
M8 20
M12 60
M10 50
M10 38
M36 110
M8 22
M8 20
M6 7
M6 7
M10 32
M6 7
M8 20
M10 42
M6 9
M8 23
M5 3
M18 23
M12 50
M14 130
M8 28
M6 9
M10 18
M8 28
M6 9
M10 18
1 - 21