GENERAL INFORMATION
1.8.2.
PRODUCT APPLICATIONS
Use only the products specified below for motorcycle maintenance.
These products have demonstrated suitability for all usage conditions specified by the manufacturer after long-time test-
ing.
IMPORTANT: The products for which a part number is given are available at request, (SEE TABLE).
PRODUCT FEATURES
Description
Molykote 111 / N. ROTAX 897 161
LOCTITE ANTI-SEIZE 76710 N. ROTAX 297 431
Lubricate
Grease
Transmission oil
Engine oil
LOCTITE 221 / N. ROTAX 899 785
LOCTITE 648 / N. ROTAX 899 788
Silastic 732 RTV / N. ROTAX 297386
1 - 20
WWW.PlanDeGraissage.ORG
Use
-
Space between the two water pump oil seals.
-
Starter transmission gears.
-
Engine shaft ball bearing seats.
-
Engine countershaft ball bearing seats.
-
Gearshaft ball bearing seats.
-
All ball bearings, sintered disks, gear sets, cylinder
walls, unless otherwise specified.
-
Oil seal edges, unless otherwise specified.
-
Engine oil SAE 30, 0.6 l
-
Super 2-stroke oil
-
Flush-head countershaft bearing lockring screw.
Flush-head starter pedal bearing lockring screw (RX
only).
-
Starter gear retainer hex bolt
-
Electric starter locking hex bolts.
-
Oil pump locking hex bolts.
-
All Taptite screws for reassembly of the clutch cover
and casing.
-
Hex nut for locking the flywheel to the engine shaft.
-
Casing water hose.
-
Casing electric starter hole cover (RX only)
-
Idler indicator contact screw.
-
Ignition cable grommet.
LEONARDO 250 - 300