Step 6: Perform Initial Software Configuration; Enter Configuration Mode - Juniper MX104 Quick Start Manual

Step 6: Perform Initial Software Configuration

IN THIS SECTION

Enter Configuration Mode | 21

Configure User Accounts and Passwords | 22
Configure System Attributes | 22
Commit the Configuration | 23
This procedure connects the router to the network but does not enable it to forward traffic. For complete
information about configuring the router to forward traffic, including examples, see the Junos OS
configuration guides.
To configure the software:
Enter Configuration Mode
1. Verify that the router is powered on.
2. Log in as the "root" user. There is no password.
3. Start the CLI.
root# cli
root@>
4. Enter configuration mode.
cli> configure
[edit]
root@#
21