Juniper SRX300 Quick Start Manual page 3

To mount the SRX300 in a rack, you'll need to order a rack mount kit appropriate for your installation. If you don't have
a power supply adapter tray, order the SRX300-RMK0 rack mount kit. If you already have a power supply adapter tray,
order the SRX300-RMK1 rack mount kit.
The SRX300-RMK0 rack mount kit has:
Twelve flat-head M3x5mm Phillips mounting screws
One mounting bracket
Power supply adapter tray and two adapter stopper brackets
The SRX300-RMK1 rack mount kit has:
Eight flat-head M3x5mm Phillips mounting screws
Two mounting brackets
You'll also need:
Someone to help you do the installation
Rack mount screws appropriate for your rack
A number two Phillips (+) screwdriver
Rack It
1. Review General Safety Guidelines and
2. Wrap and fasten one end of the electrostatic discharge (ESD) grounding strap around your bare wrist, and connect the
other end to a site ESD point.
3. Attach the mounting bracket and power supply adapter tray to the sides of the SRX300 using the screws that came
with the rack mount kit and the number two Phillips (+) screwdriver.
Warnings.
3