2. Install the Drain Pipe
X X
PVC Installation (Shown)
Measure the distance "X" from the floor surface to the inside ledge of the P-trap.
Subtract 3/4" (19 mm) from dimension "X" and cut the PVC pipe.
Apply PVC primer and cement to the outside ends of the PVC pipe, the inside of the flange, and the inside of the P-
trap.
Connect the PVC pipe, the flange, and the P-trap.
Secure the flange with screws on the floor.
Brass Installation
NOTE: Brass pipe installation requires Brass Floor Flange Kit K-25864-NA.
Follow the instructions included with the brass adapter kit.
Kohler Co.
X
3/4"
(19 mm)
5
1539448-2-A