Table of Contents
Advertisement
10. BEFORE INSTALLING UNIT
A. TILING-IN BEAD INSTALLATION – DROP-IN
MODELS ONLY
An optional tiling-in bead is recommended for the side of
the whirlpool that contacts the wall. This bead prevents
water from seeping between the whirlpool and the wall.
Refer to Ordering Information located in the Roughing-In
section beginning on Page 4.
Install this bead now. Refer to the installation instructions
packed with the tiling-in bead.
B. PARTIALLY INSTALL BATH DRAIN
Install the drain on the bath according to the drain
manufacturer's instructions. When installing the drain
overflow tube and hood, be sure to adequately seal
along the edges of the hood to prevent leakage.
C. PROTECT WHIRLPOOL UNIT
Position a drop cloth or similar material in the bottom of
the unit. Be careful not to scratch the surface of the
product.
Kohler Co., Kohler WI
13
EA
113867-2-
(-)
Advertisement
Table of Contents
