Before You Begin - Kohler K-29325 Installation Instructions Manual

Before You Begin

CAUTION: Risk of personal injury. This bath is heavy. Obtain sufficient help and use lifting straps to lift or move
the bath.
CAUTION: Risk of product damage. Not recommended for installation in a continuously wet environment.
CAUTION: Risk of product damage. If welding is required, cover the bath's surface to prevent welding deposits
from damaging the enameled surface.
IMPORTANT! The bath must be installed indoors. Outdoor installation will void the warranty.
IMPORTANT! Provide adequate floor support. Refer to the Specification Sheet for specific floor loading requirements.
IMPORTANT! To ensure a successful installation, install the bath on a level finished floor.
IMPORTANT! Drain parts are included in a small box within the carton. Locate and retain the small box before
discarding the carton and packing material.
Follow all local plumbing and building codes.
Unpack and inspect the product for damage. Return the product to the carton until installation.
This bath will not easily fit through doorways. Carefully plan how to move the bath into the installation area.
Install the bath to an adequately supported, level finished floor.
Install this bath in a freestanding installation, with either a shroud or pedestal base. Follow the instructions that pertain to
your chosen installation.
This bath includes a drain without drain trim.
To simplify future maintenance, provide access to plumbing connections.
This bath conforms to ASME A112.19.1/CSA B45.2. All dimensions are nominal.
Kohler Co. 3
1539448-2-A