Olympus OM-1 Repair Manual page 67

D-l
ORDER OF DISASSEMBLY
o Refer to the part number noted in the illustration of disassembly on
the opposite side.
o X mark at the head of the part number shows the part which should
not be touched directly by fingers. Be sure to cover fingers with
rubber sacks.
General Order of Disassembly
1. Removal of CA8703 (Top-cover)'.
1
2. Separation of CA8702 (Body front part) from (Die-cast body). ... 2
3. Disassembly of the shutter . 4
4. Disassembly of the film advance mechanism. 9
5. Disassembly of CA8702 (Body front part). 11
6. Disassembly of CA8961 (Frame) and the exposure meter. 17
Detailed Order of Disassembly
1. Removal of CA8703 (Top-cover)
1) Remove CA9030 (Nut) - using the tool KC-CA9030G
2) Remove CA8752 (Holder) - using the tool KC-CA8752G
Pay attention not to make scratches on CA9135 (Plate).
If scratched, replacement is required.
http://olYmpus.dementia.org/Harchvare