Olympus OM-1 Repair Manual page 65

C-18
11. Power Consumption At BV16, 800^iA or less
12. Leakage: SjiA or less
13. Contact efficiency:
X contact: 70% or above at the interval of 1 ms.
in slow speed including 1/60 sec.
FP contact: 70% or above at the interval of 2.5 ms.
14. Insulation resistance: 30MQ and above at 500V.
15. Contact resistance: Ascertain continuity at 3V.
16. Time lag: X contact: At 1/60 sec., it should be switched in within
1.5 ms. of the closing action of the second
curtain, upon completion of the first curtain
opening.
FP contact: It should be switched in at 8 - 14 ms. prior
to commencement of the first curtain action.
17. Vertical discrepancy in positioning the actual picture:
S°0D bad
The frame of the actual picture
should not be overlapped with
the perforation on the film.
18. Position of perforations: Perforations should be beyond 0.5mm
from the center line between each frame.
0 5
19. Interval between picture frames: 2±0*5mm
h