Toshiba MMK-UP0051DHPL-E(TR) Service Manual page 150

No. Part name
Plasma ion 1) Follow the procedure item ③
7
assembly
2) Disconnect the plasma ion connector.
Unit high voltage
High voltage wire
3) Remove cover ion by push hooking claw to left side
4) Pulling out the high voltage unit from back body.
<To re-installation>
- Arrange high voltage wire follow the figture.
High voltage wire
- Insert 2 ribs into the drain pan.
- Press hooking claw to the drain pan.
Procedures
Cover ion
direction and then pulling out of the drain pan.
Drain pan
Plasma ion connector
Back body
Unit high voltage
Plasma ion
Cover ion
Ribs
- 150 -
Remarks
Cover ion
Hooking claw