Toshiba MMK-UP0051DHPL-E(TR) Service Manual page 145

No. Part name
Electrical part 1) Follow the procedure item ③.
4
Procedures
TC1 sensor
TC2 sensor
TA sensor
TCJ sensor
Earth line
Power supply
2) Remove screw holding the electrical part cover.
3) Remove screw High voltage partition.
Screw
4) Disconnect the connectors for the fan motor and
vertical louver motor from P.C. board assembly.
5) Remove TA sensor from the cover drain.
Fan motor
Vertical louver &
Horizontal louver
LED connector
Electric
part cover
Pull out
Cover drain
- 145 -
Remarks
Unit LED display
High voltage partition
Screw
TA sensor