Table of Contents
Advertisement
INSTALLATION
A
Lower the upper motor
housing (J) and twist
clockwise to secure.
Ensure the fan is sealed by
eliminating any gap between
the housing and fan.
A
J
F
C
Hanger Guide Rails
Hanger Ball
Tabs
E
14
STEP 3: MOTOR ASSEMBLY
CRUSH HAZARD. To prevent SERIOUS INJURY or DEATH, ALWAYS attach the Retention
Cable to the fan motor and secure to the building structure on EVERY fan.
B
Place hanger guide (L) through the
back of the hanger bracket (H) until
the back of the guide and bracket are
flush. It should snap into place when
correctly installed.
E
H
Hanger Groove
C
Lift motor assembly and insert hanger ball
into hanger bracket (H), guiding the hanger
ball tabs along the hanger guide rails until
the hanger ball is secure. The hanger groove
should be in between both hanger ball tabs.
REMOVE HANGER GUIDE FROM BRACKET
by squeezing ends together and sliding
away from bracket.
B
H
D
D
To secure the motor assembly take
the restraining bracket and place
over the ceiling bracket and align the
holes. Insert and secure a screw into
each hole.
L
H
E
E
H
Advertisement
Table of Contents
