Table of Contents
Advertisement
INS TA L L ATI ON
A
Insert retension link into
fork and align holes.
Insert clevis pin into
retention rod and secure
with provided clip.
A
B
C
3
MOTOR ASSEMBLY
B
Align the connector
from the motor with the
downrod connector.
Twist the collar on the
connector to complete the
connection.
Be sure to twist until the
connection locks.
C
Lift motor up to downrod
while pushing cables into
downrod.
Feed the press studs
through downrod flange.
Secure with nylon lock
nuts. (Pull excess wire
and cable through top of
downrod.)
NOTE
Be sure not to pinch the motor cable
when raising the downrod into place.
10
Advertisement
Table of Contents
