Page 1
Type B,G,T Models Type B,G,T Models Type B,G,T Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
Page 2
90% Pre-Assembled Out Of The Box! Makes Installation Fast and Easy: 1. Install mounting bracket and make wiring connections 2. Attach EasyLock Blades Installation is complete! Please follow the detailed installation instructions inside this manual 45070-01 • 01/26/12 • Hunter Fan Company...
If you want to use an existing fan site, complete the following checklist to Fan Support determine if the site is acceptable and safe for your new Hunter fan. If you System cannot check off every item, prepare a new fan site as described on this page.
Page 5
Section 2 • Installing the electrical codes and ANSI/NFPA 70. If Ceiling Plate. you are unfamiliar with wiring, use a qualified electrician. 45070-01 • 01/26/12 • Hunter Fan Company...
Page 6
Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps Ceiling in this manual include instructions for all three Installer’s Choice...
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3” Wood Steps 2-3 – 2-6 Screw 45070-01 • 01/26/12 • Hunter Fan Company...
Adapter 3-7. Raise the fan and align the slots in the canopy with the hooks on Low Profile the ceiling plate. Washer 3-8. Place the slots over the hooks to hang the fan. 45070-01 • 01/26/12 • Hunter Fan Company...
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45070-01 • 01/26/12 • Hunter Fan Company...
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 45070-01 • 01/26/12 • Hunter Fan Company...
Once they are loosened, finish unscrewing them by will damage the protective hand until they are completely separated from the blade iron. Dust Armor on the blades. Carefully remove the blade. 45070-01 • 01/26/12 • Hunter Fan Company...
7-5. The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades. Do not use a furniture polish or any other cleaners that leave any residue, as they will damage the protective Dust Armor on the blades.
Page 14
Hunter fans have the power to cut your cooling costs up to 40%. Beat the High Cost of Cooling The air movement created by a Hunter ceiling fan lets you set your thermostat higher and still stay comfortable. Every degree you raise the thermostat saves up to 7% on energy costs.
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 1-866-268-1936) or visit us at our website at http://www.HunterFan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. #400 Memphis, Tennessee 38016 45070-01 • 01/26/12 • Hunter Fan Company...