Step 7: Blades - Hunter TRAK WIRED Installation Manual

INSTALLATION
A
Match blade with colored circle to blade iron with the
same colored circle. Slide blade over blade iron and
align the blade screw holes with the blade iron holes.
Place blade installation tool into hole closest to the fan
to help align screw holes.
NOTICE
ALWAYS confirm the colors on each fan blade holder matches the colors on the blade. This will ensure that the
fan is properly balanced to prevent possible damage due to wobble. To reduce the risk of personal injury, do
not bend the blades or blade holders when installing the fan.
A
G
B
G

STEP 7: BLADES

B
Insert a screw into the remaining two
screw holes. Tighten both screws
F
F
C
Remove installation tool and insert a
screw into the remaining screw hole
and tighten. Repeat for each blade.
Installation Tool
G
C
Repeat x4
F
19