Table of Contents
Advertisement
INSTALLATION
To prevent SERIOUS INJURY or DEATH, ALWAYS mount fan directly from building structure or outlet box marked acceptable for fan support of 70
lbs (31.8 kg).
•
CAUTION: Do not install the fan from a single structure such as a purlin, truss, I-beam or bar joist.
•
For any questions or concerns regarding the building structure, consult a structural engineer.
A
Remove the four screws
from the restraining bracket
and set aside. Remove the
restraining bracket from the
hanging bracket (H) and set
aside.
Remove any existing bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan's box.
OFF
Do this first!
12
STEP 1: CEILING BRACKET
CRUSH HAZARD
A
To avoid possible electrical shock, before installing
your fan, disconnect the power by turning off the
circuit breakers to the outlet box associated with
the wall switch location.
H
H
Machine Screws
Use machine screws (provided
with outlet box) and washers
when securing to existing ceil-
ing fan-rated outlet box. Make
sure it is securely installed and
is acceptable for fan support of
31.8 kg (70 lbs) or less.
For angled ceilings,
point opening
toward peak.
If you are unable to do this,
call Technical Department at
1-844-591-FANS (3267), or email us at:
fansupport@hunterfan.com for guidance.
H
Advertisement
Table of Contents
