Hunter TYPE T Installation And Operation Manual
Ceiling fans
Hide thumbs
Also See for TYPE T:
- Owner's manual and installation manual (18 pages) ,
- Installation and operation manual (15 pages) ,
- Owner's manual (16 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
installation and
operation manual
for Hunter
Ceiling Fans
TYPE T Models
45015-01 • 02/13/08
Advertisement
Table of Contents
Related Manuals for Hunter TYPE T
Summary of Contents for Hunter TYPE T
- Page 1 For Your Records and Warranty Assistance Ceiling Fans Model Name: _____________________ Catalog/Model No.: ________________ Serial No.: ________________________ Date Purchased: ___________________ Where Purchased: _________________ TYPE T Models For reference also attach your receipt or a copy of your receipt to the manual. 45015-01 • 02/13/08...
-
Page 2: Table Of Contents
Fan ......11 use a solid-state speed control with this fan. Use only Hunter speed 9 • Troubleshooting ....12 controls. © 2007 Hunter Fan Company 45015-01 • 02/13/08 • Hunter Fan Company... - Page 3 Installer’s Choice and Optional Accessories Understanding Mounting and Installer’ s Choice® Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods. Standard Outlet Box Mounting Considering Optional Accessories Style Consider using Hunter’s optional accessories, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product.
-
Page 4: Getting Ready
To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magnetic tip recommended) -
Page 5: Installing The Hanger Bracket
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer Steps 2-2 – 2-4 Ceiling Peak Ceiling Peak Large Large Opening Opening 3” Screw LEFT RIGHT Step 2-3 (Angled Ceiling Only) 45015-01 • 02/13/08 • Hunter Fan Company... -
Page 6: Assembling And Hanging The Fan
WARNING: Do not carry or lift fan by canopy. 3-4. Raise the fan and place the ball into the hanger bracket. 3-5. Align the bump on the ball with the notch in the hanger bracket. (Rotate the fan until you hear the bump pop into place.) Assembly Screw Go to 4 • Wiring the Fan. Set Screw Hanger Adapter WARNING: Fan may fall if not assembled as directed in these Step 3-2 installation instructions. Allen wrench Notch Steps 3-4 – 3-5 45015-01 • 02/13/08 • Hunter Fan Company... -
Page 7: Wiring The Fan
All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Included with your Hunter fan is a wall control designed for use with this product. Do not use any wall control other than the one provided. 4-1. Before attempting installation, make sure the power is still off. -
Page 8: Installing The Canopy And Canopy
5-6. Twist canopy trim ring clockwise to secure the canopy. Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 5-3 Step 5-4 Canopy Step 5-5 Screw 45015-01 • 02/13/08 • Hunter Fan Company... -
Page 9: Assembling The Blades
6-5. Install a setscrew into the top of the blade iron hub with the provided Allen wrench. Tighten the setscrew securely. 6-5. Repeat the above steps for the second blade. Blade Iron Steps 6-3 – 6-4 Blade Iron Hub Bump Blade Iron Notch Blade Assembly Screws Allen wrench Blade Iron Armature Mounting Holes Screw Step 6-2 Blade Assembly Screw Setscrew Blade Iron Hub Barrel Nut Blade Iron 45015-01 • 02/13/08 • Hunter Fan Company... -
Page 10: Operating And Mounting
7 • Operating and Mounting the Control Included with your Hunter fan is a wall control designed for use with this product. Do not use any wall control other than the one provided. 7-1. Disconnect power to ceiling fan at the main electric panel. Remove fuse or switch circuit breaker to OFF position. 7-2. Install in a metal or plastic wallbox. Remove wallplate to expose the wiring, and disconnect the existing switch. 7-3. If two wires are visible, connect each to a Hunter speed control lead. Use the wire connectors supplied to make the connections. If a ground wire is provided in your electrical box, attach it to the ground screw near the bottom of the mounting plate. - Page 11 In cold weather, use upward air flow pattern To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 45015-01 • 02/13/08 • Hunter Fan Company...
-
Page 12: Troubleshooting
1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 45015-01 • 02/13/08 • Hunter Fan Company...