Kenwood MIDI M-97 Instruction Manual page 78

in case of difficulty
Tuner
Symptom
Cause
The clock display is blinking without
changing from a certain time.
The timer does not work.
Radio stations cannot be received.
@ There was a power failure.
@ The power cord was unplugged.
@ The current time is not set, or there was a
power failure.
@ The timer ON time and OFF time have
not been set.
@ The timer execution has not been speci-
fied.
@ No antenna is connected.
@ The broadcast band is not set properly.
@ The frequency of the desired station is | @ Tune the frequency of the desired station.
not tuned.
A station which was preset cannot be
received by pressing the corresponding
numeric key.
@ The preset station belongs to a frequency
that cannot be received.
@ The preset memory was cleared because
the power cord had been unplugged for a
long period of time.
Interference.
CD player
ey ees
Symptom Cause Remedy
Disc is loaded, player does not play.
@ Noise due to ignition noise of an automo-
bile.
@ Noise due to an influence from an electric
appliance.
@ Noise due to a nearby TV set.
@ Disc is loaded upside down.
@ Disc is loose.
@ Disc is dirty.
@ Disc is cracked.
@ Condensation occurred on the optical lens
unit.
Remedy
@ Set the current time again.
@ Set the current time again.
@ Set the current time referring to 'Time ad-. |
justment'.
@ Set the timer ON time and OFF time.
@ Specify execution by pressing the[ EXE. |
key.
@ Connect an antenna.
@ Set the broadcast band properly.
@ Preset a station with a receivable frequen-
cy.
@ Preset the station again.
@ Install the outdoor antenna apart frorn the
road.
@ Turn off the power of the appliance.
@ Install the system more apart from the TV
set.
@ Load the disc again with its label side up.
@ Insert the disc properly.
@ Wipe off the dust on the surface of the
disc referring to "Disc handling precau-
tions".
@ Replace the disc with a new one.
@ Leave the player for about 1 hour so that
the condensation is removed.
No sound.
@ Disc is not loaded.
@ Disc is too dirty.
@ Disc is cracked.
@ The connection cords are inserted loose-
ly.
Music is interrupted. (Sound is skipped.)
78 = M-97/97M(En)
@ Disc is too dirty.
@ Disc is cracked.
@ Oscillation is applied to this unit.
@ Load a disc.
@ Wipe off the dust on the disc surface re-
ferring to "Disc handling precautions'.
@ Replace the disc with a new one.
® Connect all connection cords firmly.
@ Wipe off the dust on the disc surface =a
ferring to "Disc handling precautions'.
@ Replace the disc with a new one.
@ Try selecting a place where no strong vi-
brations occur by changing the installation
place, etc.