Table of Contents
Advertisement
m@ Normal EDIT recording
This function allows to be edited, according to the re-
cording time of the tape, to ensure the order of the
CD tracks so that no track is interrupted at the end of
each side of tape.
1 Set up Deck B ready for recording.
@ Insert the cassette tape.
Tape to be recorded
® Set the tape
transport direction.
@ Select the tape side(s)
to be recorded.
DIRECTION
) : Select two-side recording.
@ Select the Dolby NR mode.
DOLBY
NR
2 Select the CD/LD input.
3 Insert the disc in the CD player.
@ When you wish to program tunes, carry out the programming
before step 4.
4 Select the EDIT mode with the |EDIT MODE
key of the CD player.
EDIT
MODE
Es EDIT j-—-» Al EDIT —»
MULTI As
The mode changes every time
the key is pressed.
@ Proceed to the next step within 8 seconds after setting
if 8 seconds have elapsed, press the
key again.
@ The CD playback mode is set automatically to [PGM].
@ When using the[
SPACE] key, press the
ter pressing the
key in[PGM].
Notes:
M-97(DP-97)
5 Input the two-way recording time of the tape.
Use the numeric keys of the CD player.
C-60 tape: Press
6 times, and (0 |once.
C-46 tape: Press [+104 times, and [6 jonce.
@ 46, 54, 60 or 90 can also be selected oven time tel ME!
key is pressed.
In this case, press the
key
again to establish the input.
@ Tracks are edited automatically to fit sides A and B, and the
end of editing is indicated when the EDIT indicator changes
from blinking to continuous lighting.
@ |f a program containing a few tracks has been programmed
previously, these tracks can be recorded in priority.
@ When the
key is pressed again while EDIT
is lighted, "SHUFFLE" appears on the display and re-editing
of tracks is performed.
Select the mode with the[ MODE |key of the
cassette deck.
MODE
@ Norma! edit recording takes place
when you select
or| ERASE ].
@ When you select| CROSS] , the intervals between music piec-
es are linked by overlapping of fade out and fade in so that
edit recording with no breaks between pieces takes place.
In
the CROSS mode, the double-speed recording is not possible.
Nor
CCRS_
HiGH
7 Press the[CCRS] key.
Normal-speed recording
Double-speed recording
@ |n the | CROSS|
mode, the double-speed re
cording is not possible.
@ | HIGH] or[ NOR. ]is displayed in the display.
Recording occurs as shown below.
NOR
_CCRS HIGH
ie:
Track subjected to
Priority given to programmed tracks
>
time adjustment
cS
Tracks are recorded basically according to their numbers, but some
tracks are replaced with tracks subjected to time adjustment.
@ The CD player and cassette deck enter the stop mode auto-
matically after the completion of recording.
M-97/97M(En)
63
Advertisement
Table of Contents
