Kenwood MIDI M-97 Instruction Manual page 73

1 Switch the power ON. pau
Press the [POWER |key 'ON/STAN
of the amplifier.
@ Press the numeric key.
SAT
+/SUN 2MON STUE aWED S/THU SFRL
® Press the key.
@ The program No. indicators (1 to 6) blink.
@ The station must be preset previously.
3 Select the program No. to be used.
© Insert a tape in Deck B.
@® Set the tape transport direction.
® Select the side(s) to be recorded onto.
@ Select the Dolby NR mode.
@ The selected program No. indicator blinks.
@ The auto-bias adjustment cannot be used.
0:00AM :[0], [0], [0], [0 | ae
4/BUN 2AV0N TUE WED STHU GFR) 7/SAT
a a a co a a 8
1 1 Activate the execution of the program.
® Press the[EXE.] key.
@ Select the program No. to be executed by pressing the
numeric key under which it is set.
0:30AM :[0], [0], [3]. [0] =
1/GUN _2/MON __3TUE
awe STHU BRL _7/GAT
@ The selected program No. indicator lights up.
1 2 Switch the power OFF.
Press the key
of the amplifier.
7 Select the REC mode.
ENTER
BAND
ee eel
The timer modes are switched
between PLAY and REC every
time the/BAND/key is pressed.
ON/STANT
Notes:
M-97/97M{En) 73