Table of Contents
Advertisement
Playback operation of cassette decks
Deck A eject key
Deck B eject key
DOLBY NR key
HZ To play back a tape
Deck A Operation keys
DIRECTION select key
Deck B Operation keys
1 Insert a cassette tape.
Press the eject key.
@ The type of tape, Normal, Chrome or Metal, is detected and set automaticlaly.
Close securely
@
Be sure to remove tape slack before insertion.
2 Determine the playback conditions.
®
Select the playback mode.
DIRECTION
by pressing upper inside.
@
Select the Dolby NR mode.
Select according to the tape to be played.
To play both sides endlessly.
EJ
To stop after playing both sides of tape.
goes off.
.
ressed.
The indication changes every time the key is pressed.
A
3 Start playback.
@ For play of deck A, use the A deck play key on the left side.
To stop playback
@
Do not press the eject key until the tape has stopped completely.
Dolby noise reduction system
The Dolby noise reduction system was developed to reduce the
tape hiss noise generated during playback.
The optimum
effect of the Dolby NR system is obtained when
the same type NR system is used for both recording and play-
back.
If a different type NR system is used, playback is not per-
formed correctly. Make sure that the same type noise reduction
system is used for both recording and playback.
Dolby B NR
The most popular noise reduction
system
used in home
audio
components.
Usually, Dolby NR system corresponds to B NR.
Dolby C NR
Dolby C NR offers improved noise reduction performance
over
that of theDolby B NR.
It features a superior noise reduction ef-
fect.
Use Dolby C NR to record or playback with this unit.
It is
recommended that tapes recorded with the Dolby NR system be
marked "B" or "C', so that they can easily be distinguished.
M-97/97M(En)
41
Advertisement
Table of Contents
