Kenwood MIDI M-97 Instruction Manual page 54

Compact audio system
Table of Contents

Advertisement

Recording of CD playback (CCRS) (M-97M)
DOLBY NR key
MODE
key
m@ CROSS- fade recording
This function causes the end of each track to be faded out
CCRS keys
while the beginning of the next track is faded in to create a
music tape without interruption between tunes.
DIRECTION key
.
To
record
by track No. sequence:
1
Set up Deck B ready for recording.
atin
Sl
q
@ Insert the cassette tape.
Tape tobe recorded
@ Make sure the[PGMlin-
@ Select a favorite disc.
dicator is extinguished.
P.MODE
Cc
OIC NO.
@ Set the tape
DIRECTION
5 Select the CROSS-fade recording mode.
MODE
7
: Two-side recording
=:
: © One-side recording
@ Select the Dolby NR mode.
_
_
COOLEY NA
E Fe G Gq G
Ty
Brith
FADE —» ERASE —»[CROSS
goes
o n t .
The mode changes every time the key is pressed.
2 Select the CD/LD input.
6 Press the NOR. key of CCRS.
NOR
CCAS
HIGH
3
Insert the disc in the CD player.
@
Close the door.
4
Select the disc and track to be recorded.
To record by programmed
sequence:
@ | NOR. | is displayed.
@ Enter the
mode.
@ Program desired tracks | Recording occurs as shown below.
P.MODe
in desired order.
@
Refer to page 32.
Recording inetrrupted in the middle of C
R
| u n i
2
t
it
t
'DISC
NO.
emote
control
unt
C
NO.
©
i n d i c a t o r
t i
©O9O
oS
fam)
(Ome
i
Stop after erasure of F
Recording of C from the beginning
@
Tape end das not fade out.
Notes:
1. When the
key is pressed during CD play, the playback is interrupted and CCRS setting operation starts.
2. The CCRS searches the peak level on a CD in a limited period of about 60 seconds.
Therefore, it could happen that the optimum level can-
not be adjusted, through it is a very rare case.
3. If the length of a track on the CD is extremely long such as with a classical music, the CCRS cannot be used because the music cannot be
fit in one side of tape. In such a case, the CD should be recorded referring to "Synchro recording of CD playback".
4. \f the beginning or end of a track is originally fade-in/faded-out, the blank between the tracks may be longer when CROSS-fade recorded.
. The cross-faded parts of some tunes may not be clear. In such a case, record with another edit recording.
. If cross-fade is used with the CD player Normal edit mode, the blank tape remaining at the end of each side of the tape may be longer than
indicated on the CD player display.
an
54 -97/97M(En)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Midi m-97m

Table of Contents